View AME1084ACBT_3225486.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ame, inc. 1 ame1084 5a low dropout positive voltage regulator n typical application n functional block diagram l low dropout voltage ----- 1.4v at 5a l adjustable or 3.3v fixed voltage l line regulation typically 0.015% l load regulation typically 0.05% l adjust pin (adj) current less than 90 m a l overcurrent protection l thermal protection l available in to-220, to-263, to-252 the ame1084 is a 5a low-dropout positive voltage regu- lator. it is available in fixed and adjustable output voltage versions. overcurrent and thermal protection are inte- grated onto the chip. output current will limit as it reaches the pre-set current or temperature limit. at full rated out- put current the dropout voltage is 1.4v (max.). ame1084 series regulators provide excellent regulation over line, load and temperature variations. l high efficiency linear regulators l post regulators for switching supplies l 5v to 3.3v voltage converter l battery charger n general description n features n applications thermal protection bandgap reference current limiting amplifier input output adj/gnd error amp. ame1084 load 10 m m m m f tan gnd v out 4.75v to 7v v in 10 m m m m f tan
ame, inc. 2 5a low dropout positive voltage regulator ame1084 n pin configuration ame1084 1. adj / gnd 2. v out 3. v in to-220 front view to-252 front view to-263-2 front view to-263-3 front view ame1084 1. adj / gnd 2. v out 3. v in ame1084 1. adj / gnd 2. v out 3. v in ame1084 1. adj / gnd 2. v out 3. v in amexxxx 1 ame1084 23 1 3 2 ame1084 1 3 2 ame1084 1 3 2 ame1084
ame, inc. 3 ame1084 5a low dropout positive voltage regulator n ordering information operating temperature range number of pins package type product grade or option special feature ame1084 x x x x x a: adj c: 0 o c to 70 o c b: to-220 s: 2 z: lead free b: 1.5v c: to-252 (d pack) t: 3 c: 2.5v d: to-263 d: 3.3v product grade or option special feature operating temperature range package type number of pins
ame, inc. 4 5a low dropout positive voltage regulator ame1084 part number marking output voltage package operating temp. range AME1084ACBT ame1084 acbt yyww adj to-220 0 o c to 70 o c ame1084bcbt ame1084 bcbt yyww 1.5 to-220 0 o c to 70 o c ame1084ccbt ame1084 ccbt yyww 2.5 to-220 0 o c to 70 o c ame1084dcbt ame1084 dcbt yyww 3.3 to-220 0 o c to 70 o c ame1084acdt-3 ame1084 acdt-3 yyww adj to-263-3 0 o c to 70 o c ame1084bcdt-3 ame1084 bcdt-3 yyww 1.5 to-263-3 0 o c to 70 o c ame1084ccdt-3 ame1084 ccdt-3 yyww 2.5 to-263-3 0 o c to 70 o c ame1084dcdt-3 ame1084 dcdt-3 yyww 3.3 to-263-3 0 o c to 70 o c ame1084acdt ame1084 acdt yyww adj to-263-2 0 o c to 70 o c ame1084bcdt ame1084 bcdt yyww 1.5 to-263-2 0 o c to 70 o c ame1084ccdt ame1084 ccdt yyww 2.5 to-263-2 0 o c to 70 o c ame1084dcdt ame1084 dcdt yyww 3.3 to-263-2 0 o c to 70 o c ame1084accs ame1084 accs yyww adj to-252 0 o c to 70 o c n ordering information (contd.)
ame, inc. 5 ame1084 5a low dropout positive voltage regulator part number marking output voltage package operating temp. range ame1084bccs ame1084 bccs yyww 1.5 to-252 0 o c to 70 o c ame1084cccs ame1084 cccs yyww 2.5 to-252 0 o c to 70 o c ame1084dccs ame1084 dccs yyww 3.3 to-252 0 o c to 70 o c n absolute maximum ratings caution: stress above the listed absolute maximum rating may cause permanent damage to the device n ordering information (contd.) please consult ame sales office or authorized rep./distributor for other voltage accuracy and package type availabil- ity. symbol maximum unit v in 7v to-220 3 to-252 5 to-263 3 to-220 50 to-252 90 to-263 50 to-220 3000 to-252 1200 mw to-263 2800 t j 0 to 125 t stg - 65 to 150 t lead 260 p d internal power dissipation (d t = 100 o c) o c/w thermal resistance (junction to ambient) q ja operating junction temperature range storage temperature range lead temperature (10 sec) o c parameter input voltage thermal resistance (junction to case) q jc
ame, inc. 6 5a low dropout positive voltage regulator ame1084 parameter symbol min typ max units t j =25 o c 1.485 1.515 over temp. 1.470 1.530 t j =25 o c-0.0150.2 over temp. - 0.035 0.2 t j =25 o c - 0.05 0.3 over temp. - 0.2 0.4 t j =25 o c-1.21.4 over temp. - 1.3 - current limit i s 5.0 - - a temperature coefficient t c -0.005- %/ o c temperature stability t s -0.5- % rms output noise v n -0.003- %v o ripple rejection ratio r a -72- db vo v line regulation reg line % output voltage (fixed voltage) v in = 5v i o = 0a v in = 4.5 - 7v i o = 0a 1.500 load regulation reg load % v d v dropout voltage d vout, d vref = 1% v in = 5v i o = 0a - 5a i o = 0a - 5a 13 ma t j = 25 o c test condition quiescent current (fixed model) i q v in =5v, io=0-5a, over temp. - 12 v in = 5v, i o = 5a, over temp. v in = 4.5 - 7v, over temp. v in = 4.5 - 7v, i o = 0a - 5a v in = 5v, i o = 500ma, over temp. parameter symbol min typ max units t j =25 o c 1.238 1.262 over temp. 1.225 1.275 t j =25 o c - 0.015 0.2 over temp. - 0.035 0.2 t j =25 o c - 0.05 0.3 over temp. - 0.2 0.4 t j =25 o c-1.21.4 over temp. - 1.3 - current limit i s 5.0 - - a temperature coefficient t c -0.005- %/ o c t j = 25 o c-55- over temp. - - 120 temperature stability t s -0.5- % minimum load current i o 10 - - ma rms output noise v n -0.003- %v o ripple rejection ratio r a -72- db 1.250 v line regulation reg line % reference voltage (adjustable voltage) v in = 5v i o = 10ma v in = 2.75 - 7v i o = 10ma dropout voltage d vout, d vref = 1% v in = 5v i o = 10ma - 5a i o = 10ma - 5a v ref reg load % v d v m a 5 v in = 2.75 - 7v i o = 10ma - 5a adjust pin current change d i adj -0.2 v in = 2.75 - 7v, i o = 10ma - 5a over temp. test condition v in = 5v t j = 25 o c v in = 2.75 - 7v, over temp. v in = 2.75 - 7v, i o = 10ma - 5a v in = 5v, i o = 500ma, over temp. adjust pin current i adj load regulation v in = 5v, i o = 5a, over temp. n electrical specifications ame1084axxx ame1084bxxx
ame, inc. 7 ame1084 5a low dropout positive voltage regulator parameter symbol min typ max units t j =25 o c 3.267 3.333 over temp. 3.234 3.366 t j =25 o c - 0.015 0.2 over temp. - 0.035 0.2 t j =25 o c - 0.05 0.3 over temp. - 0.2 0.4 t j =25 o c-1.21.4 over temp. - 1.3 - current limit i s 5.0 - - a temperature coefficient t c -0.005- %/ o c temperature stability t s -0.5- % rms output noise v n -0.003- %v o ripple rejection ratio r a -72- db v in = 4.5 - 7v, i o = 0a - 5a v in = 5v, i o = 500ma, over temp. t j = 25 o c v in = 5v, i o = 5a, over temp. -1213ma v in = 4.5 - 7v, over temp. quiescent current (fixed model) i q v in =5v, io=0-5a, over temp. dropout voltage d vout, d vref = 1% v d i o = 0a - 5a v load regulation reg load v in = 5v i o = 0a - 5a % 3.300 v line regulation reg line v in = 4.5 - 7v i o = 0a % test condition output voltage (fixed voltage) vo v in = 5v i o = 0a parameter symbol min typ max units t j =25 o c 2.475 2.525 over temp. 2.450 2.550 t j =25 o c - 0.015 0.2 over temp. - 0.035 0.2 t j =25 o c - 0.05 0.3 over temp. - 0.2 0.4 t j =25 o c-1.21.4 over temp. - 1.3 - current limit i s 5.0 - - a temperature coefficient t c -0.005- %/ o c temperature stability t s -0.5- % rms output noise v n -0.003- %v o ripple rejection ratio r a -72- db test condition output voltage (fixed voltage) vo v in = 5v i o = 0a v line regulation reg line v in = 4.5 - 7v i o = 0a % 2.500 load regulation reg load v in = 5v i o = 0a - 5a % dropout voltage d vout, d vref = 1% v d i o = 0a - 5a v ma v in = 4.5 - 7v, over temp. quiescent current (fixed model) i q v in =5v, io=0-5a, over temp. v in = 5v, i o = 5a, over temp. -1213 v in = 4.5 - 7v, i o = 0a - 5a v in = 5v, i o = 500ma, over temp. t j = 25 o c ame1084dxxx n electrical specifications (contd.) ame1084cxxx
ame, inc. 8 5a low dropout positive voltage regulator ame1084 1. output voltage adjustment like most regulators, the ame1084 regulates the out- put by comparing the output voltage to an internally gen- erated reference voltage. on the adjustable version, the v ref is available externally as 1.25v between v out and adj. the voltage ratio formed by r1 and r2 should be set to conduct 10ma (minimum output load). the output voltage is given by the following equation: v out = v ref ( 1 + ) + i adj x r2 on fixed versions of ame1084, the voltage divider is provided internally. n application description r2 r1 2. thermal protection ame1084 has thermal protection which limits junction temperature to 150 o c. however, device functionality is only guaranteed to a maximum junction temperature of +125 o c. the power dissipation and junction temperature for ame1084 in to-220 package are given by p d = (v in - v out ) x i out t junction = t ambient + ( p d x q ja ) note: t junction must not exceed 125 o c 3. current limit protection ame1084 is protected against overload conditions. current protection is triggered at typical 7.5a. 4. stability and load regulation ame1084 requires a capacitor from v out to gnd to provide compensation feedback to the internal gain stage. this is to ensure stability at the output terminal. typi- cally, a 10 m f tantalum or 50 m f aluminum electrolytic is sufficient. (note: it is important that the esr for this capacitor does not ex- ceed 0.5 w .) the output capacitor does not have a theoretical upper limit and increasing its value will increase stability. c out = 100 m f or more is typical for high current regulator de- sign. for the adjustable version, the best load regulation is accomplished when the top of the resistor divider (r1) is connected directly to the output pin of the ame1084. when so connected, r p is not multiplied by the divider ratio. for fixed output versions, the top of r1 is internally connected to the output. the ground pin can be connected to low side of the load to eliminate ground loop errors. v out = v ref (1+ r2 r1 ) + i adj x r2 out adj in v ref i adj 50 m m m m a v in v out r1 r2 c 1 out adj in v in r1 r2 r l r p parasitic line resistance connect r2 to load (connect r1 to case)
ame, inc. 9 ame1084 5a low dropout positive voltage regulator 5. thermal consideration the ame1084 series contain thermal limiting circuitry designed to protect itself for over-temperature conditions. even for normal load conditions, maximum junction tem- perature ratings must not be exceed. as mention in ther- mal protection section, we need to consider all sources of thermal resistance between junction and ambient. it includes junction-to-case, case-to-heat-sink interface and heat sink thermal resistance itself. junction-to-case thermal resistance is specified from the ic junction to the bottom of the case directly below the die. proper mounting is required to ensure the best possible thermal flow from this area of the package to the heat sink. the case of all devices in this series is electri- cally connected to the output. therefore, if the case of the device must be electrically isolated, a thermally con- ductive spacer is recommended.
ame, inc. 10 5a low dropout positive voltage regulator ame1084 n advanced applications adjustable output voltage paralleling regulators note: * v out = v ref ( 1 + ) + i adj x r2 ** optional for improved ripple rejection r2 r1 note: * 20m w is ballast resistance the inter - connection of #18 wire could act as ballast resistance ame1084 v in r1 r2 10 m m m m f v out 10 m m m m f i o = 0 to 10a * 20m w w w w * 20m w w w w v out v in gnd ame1084 v out v in gnd v in = 5v * v o = 1.5 - 3.45v r1 r2 10 m m m m f 10 m m m m f 2k 1k 10 m m m m f ** ame1084 v in v out adj
ame, inc. 11 ame1084 5a low dropout positive voltage regulator n advanced applications (contd.) regulator with reference regulator with reverse diode protection note: * v o = v ref + v z (v z : breakdown voltage of zener diode) ** optional for improved ripple rejection ame1084 v in 10 m m m m f 10 m m m m f 1k 10 m m m m f ** v in v out gnd *v o zener diode or voltage reference ame1084 10 m m m m f 100 m m m m f v o * v in v out gnd v in
ame, inc. 12 5a low dropout positive voltage regulator ame1084 drop out voltage vs. load current minimum operation current vs. input/outputdifferential voltage output short circuit current vs. input/output differential voltage load current (a) drop-out volatge (v) 0.90 0.95 1.00 1.05 1.10 1.15 1.20 1.25 1.30 01 23 45 n performance characteristics input/output differential voltage(v) output short circuit current (a) 0 1 2 3 4 5 6 7 8 9 123456789 input/output differential voltage(v) minimum operation current (ma) 0 1 2 3 4 5 6 7 012345 67 89
ame, inc. 13 ame1084 5a low dropout positive voltage regulator n external resistor divider table for customized voltage r1 (ohm) 100 102 105 107 110 113 115 118 121 124 vout 1.25 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 1.30 3.984 4.063 4.182 4.262 4.381 4.500 4.579 4.698 4.817 4.936 1.35 7.968 8.127 8.365 8.524 8.761 8.999 9.158 9.396 9.633 9.871 1.40 11.95 12.19 12.55 12.79 13.14 13.50 13.74 14.09 14.45 14.81 1.45 15.94 16.25 16.73 17.05 17.52 18.00 18.32 18.79 19.27 19.74 1.50 19.92 20.32 20.91 21.31 21.90 22.50 22.89 23.49 24.08 24.68 1.55 23.90 24.38 25.09 25.57 26.28 27.00 27.47 28.19 28.90 29.61 1.60 27.89 28.44 29.28 29.83 30.67 31.50 32.05 32.88 33.72 34.55 1.65 31.87 32.51 33.46 34.09 35.05 36.00 36.63 37.58 38.53 39.48 1.70 35.86 36.57 37.64 38.36 39.43 40.50 41.21 42.28 43.35 44.42 1.75 39.84 40.63 41.82 42.62 43.81 45.00 45.79 46.98 48.17 49.36 1.80 43.82 44.70 46.01 46.88 48.19 49.50 50.37 51.68 52.98 54.29 1.85 47.81 48.76 50.19 51.14 52.57 54.00 54.95 56.37 57.80 59.23 1.90 51.79 52.82 54.37 55.40 56.95 58.50 59.53 61.07 62.62 64.16 1.95 55.78 56.89 58.55 59.66 61.33 63.00 64.11 65.77 67.43 69.10 2.00 59.76 60.95 62.74 63.93 65.71 67.49 68.68 70.47 72.25 74.03 2.05 63.75 65.01 66.92 68.19 70.09 71.99 73.26 75.17 77.07 78.97 2.10 67.73 69.08 71.10 72.45 74.47 76.49 77.84 79.86 81.88 83.90 2.15 71.71 73.14 75.28 76.71 78.85 80.99 82.42 84.56 86.70 88.84 2.20 75.70 77.21 79.47 80.97 83.23 85.49 87.00 89.26 91.52 93.77 2.25 79.68 81.27 83.65 85.24 87.61 89.99 91.58 93.96 96.33 98.71 2.30 83.67 85.33 87.83 89.50 92.00 94.49 96.16 98.65 101.2 103.6 2.35 87.65 89.40 92.01 93.76 96.38 98.99 100.7 103.4 106.0 108.6 2.40 91.63 93.46 96.20 98.02 100.8 103.5 105.3 108.1 110.8 113.5 2.45 95.62 97.52 100.4 102.3 105.1 108.0 109.9 112.7 115.6 118.5 2.50 99.60 101.6 104.6 106.5 109.5 112.5 114.5 117.4 120.4 123.4 2.55 103.6 105.6 108.7 110.8 113.9 117.0 119.1 122.1 125.2 128.3 2.60 107.6 109.7 112.9 115.1 118.3 121.5 123.6 126.8 130.1 133.3 2.65 111.6 113.8 117.1 119.3 122.7 126.0 128.2 131.5 134.9 138.2 2.70 115.5 117.8 121.3 123.6 127.0 130.5 132.8 136.2 139.7 143.1 2.75 119.5 121.9 125.5 127.9 131.4 135.0 137.4 140.9 144.5 148.1 2.80 123.5 126.0 129.7 132.1 135.8 139.5 141.9 145.6 149.3 153.0 2.85 127.5 130.0 133.8 136.4 140.2 144.0 146.5 150.3 154.1 157.9 2.90 131.5 134.1 138.0 140.6 144.6 148.5 151.1 155.0 159.0 162.9 2.95 135.5 138.2 142.2 144.9 148.9 153.0 155.7 159.7 163.8 167.8 3.00 139.4 142.2 146.4 149.2 153.3 157.5 160.3 164.4 168.6 172.7 3.05 143.4 146.3 150.6 153.4 157.7 162.0 164.8 169.1 173.4 177.7 3.10 147.4 150.3 154.8 157.7 162.1 166.5 169.4 173.8 178.2 182.6 r2(ohm)=(vout-1.25)*r1/(1.25+50u*r1)
ame, inc. 14 5a low dropout positive voltage regulator ame1084 n external resistor divider table for customized voltage (contd.) r1 (ohm) 100 102 105 107 110 113 115 118 121 124 vout 3.15 151.4 154.4 158.9 161.9 166.5 171.0 174.0 178.5 183.0 187.5 3.20 155.4 158.5 163.1 166.2 170.8 175.5 178.6 183.2 187.9 192.5 3.25 159.4 162.5 167.3 170.5 175.2 180.0 183.2 187.9 192.7 197.4 3.30 163.3 166.6 171.5 174.7 179.6 184.5 187.7 192.6 197.5 202.4 3.35 167.3 170.7 175.7 179.0 184.0 189.0 192.3 197.3 202.3 207.3 3.40 171.3 174.7 179.8 183.3 188.4 193.5 196.9 202.0 207.1 212.2 3.45 175.3 178.8 184.0 187.5 192.8 198.0 201.5 206.7 211.9 217.2 3.50 179.3 182.9 188.2 191.8 197.1 202.5 206.1 211.4 216.8 222.1 3.55 183.3 186.9 192.4 196.0 201.5 207.0 210.6 216.1 221.6 227.0 3.60 187.3 191.0 196.6 200.3 205.9 211.5 215.2 220.8 226.4 232.0 3.65 191.2 195.0 200.8 204.6 210.3 216.0 219.8 225.5 231.2 236.9 3.70 195.2 199.1 204.9 208.8 214.7 220.5 224.4 230.2 236.0 241.8 3.75 199.2 203.2 209.1 213.1 219.0 225.0 228.9 234.9 240.8 246.8 3.80 203.2 207.2 213.3 217.3 223.4 229.5 233.5 239.6 245.7 251.7 3.85 207.2 211.3 217.5 221.6 227.8 234.0 238.1 244.3 250.5 256.6 3.90 211.2 215.4 221.7 225.9 232.2 238.5 242.7 249.0 255.3 261.6 3.95 215.1 219.4 225.9 230.1 236.6 243.0 247.3 253.7 260.1 266.5 4.00 219.1 223.5 230.0 234.4 240.9 247.5 251.8 258.4 264.9 271.5 4.05 223.1 227.6 234.2 238.7 245.3 252.0 256.4 263.1 269.7 276.4 4.10 227.1 231.6 238.4 242.9 249.7 256.5 261.0 267.8 274.6 281.3 4.15 231.1 235.7 242.6 247.2 254.1 261.0 265.6 272.5 279.4 286.3 4.20 235.1 239.7 246.8 251.4 258.5 265.5 270.2 277.2 284.2 291.2 4.25 239.0 243.8 250.9 255.7 262.8 270.0 274.7 281.9 289.0 296.1 4.30 243.0 247.9 255.1 260.0 267.2 274.5 279.3 286.6 293.8 301.1 4.35 247.0 251.9 259.3 264.2 271.6 279.0 283.9 291.3 298.6 306.0 4.40 251.0 256.0 263.5 268.5 276.0 283.5 288.5 296.0 303.5 310.9 4.45 255.0 260.1 267.7 272.8 280.4 288.0 293.1 300.7 308.3 315.9 4.50 259.0 264.1 271.9 277.0 284.7 292.5 297.6 305.4 313.1 320.8 4.55 262.9 268.2 276.0 281.3 289.1 297.0 302.2 310.1 317.9 325.7 4.60 266.9 272.2 280.2 285.5 293.5 301.5 306.8 314.8 322.7 330.7 4.65 270.9 276.3 284.4 289.8 297.9 306.0 311.4 319.5 327.5 335.6 4.70 274.9 280.4 288.6 294.1 302.3 310.5 315.9 324.2 332.4 340.6 4.75 278.9 284.4 292.8 298.3 306.7 315.0 320.5 328.8 337.2 345.5 4.80 282.9 288.5 297.0 302.6 311.0 319.5 325.1 333.5 342.0 350.4 4.85 286.9 292.6 301.1 306.8 315.4 324.0 329.7 338.2 346.8 355.4 4.90 290.8 296.6 305.3 311.1 319.8 328.5 334.3 342.9 351.6 360.3 4.95 294.8 300.7 309.5 315.4 324.2 333.0 338.8 347.6 356.4 365.2 5.00 298.8 304.8 313.7 319.6 328.6 337.5 343.4 352.3 361.3 370.2 r2(ohm)=(vout-1.25)*r1/(1.25+50u*r1)
ame, inc. 15 ame1084 5a low dropout positive voltage regulator min max min max a 0.45 0.58 0.0177 0.0230 b 1.60 1.95 0.0630 0.0768 c 0.51 1.50 0.0201 0.0591 d 0.45 0.60 0.0177 0.0236 e 6.40 6.80 0.2520 0.2677 f 5.40 7.20 0.2126 0.2835 g 2.20 2.85 0.0866 0.1122 h - * 2.30 - * 0.0906 j - 0.97 - 0.0380 k 5.20 5.50 0.2047 0.2165 l 1.40ref 0.055ref symbols millimeters inches n package dimension to-252(dpak)-eiaj to-252(dpak)-jedc *: typical value notes: 1. controlling dimension: millimeters. 2. maximum lead thickness includes lead finish thickness mini- mum lead thickness is the minimum thickness of base material. c g f l top view side view e k b a d h j top view side view d c b a j f g l e k h min max min max a 0.49 0.51 0.0192 0.0201 b 1.79 1.81 0.0704 0.0713 c 0.55 - 0.0216 - d 0.49 0.51 0.0192 0.0201 e 6.58 6.62 0.259 0.2606 f 6.08 6.12 0.2393 0.2409 g 2.68 2.72 0.1055 0.1071 h j k 5.31 5.37 0.2090 0.2114 l 0.68 0.72 0.0267 0.0283 * 2.30ref * 0.0906ref 0.96 0.0377 symbols millimeters inches *: typical value notes: 1. controlling dimension: millimeters. 2. maximum lead thickness includes lead finish thickness mini- mum lead thickness is the minimum thickness of base material.
ame, inc. 16 5a low dropout positive voltage regulator ame1084 min max min max a 9.65 10.668 0.380 0.420 b 8.28 9.66 0.326 0.380 c 4.06 4.83 0.160 0.190 d 0.50 1.36 0.020 0.054 e 1.14 1.40 0.045 0.055 g h 14.60 15.875 0.5748 0.625 k 0.99 2.93 0.03898 0.11535 n p 2.28 2.80 0.08976 0.11024 r 0 o 8 o 0 o 8 o symbols millimeters inches 0.381ref 0.015ref * 2.54 * 0.100 min max min max a 9.65 10.668 0.380 0.420 b 8.28 9.66 0.326 0.380 c 4.06 4.83 0.160 0.190 d 0.50 1.36 0.020 0.054 e 1.14 1.40 0.045 0.055 g h 14.60 15.875 0.5748 0.625 k 0.99 2.93 0.03898 0.11535 n p 2.28 2.80 0.08976 0.11024 r 0 o 8 o 0 o 8 o symbols millimeters inches 0.381ref 0.015ref * 2.54 * 0.100 to-263-3(d 2 pak) n package dimension to-263-2(d 2 pak) *: typical value notes: 1. controlling dimension: millimeters. 2. maximum lead thickness includes lead finish thickness mini- mum lead thickness is the minimum thickness of base material. *: typical value notes: 1. controlling dimension: millimeters. 2. maximum lead thickness includes lead finish thickness mini- mum lead thickness is the minimum thickness of base material. g r e top view side view front view d h a b k p n c g top view side view front view c d h a b k r e p n
ame, inc. 17 ame1084 5a low dropout positive voltage regulator n package dimension to-220 top view side view g i p o m n k d e c a min max min max a 5.58 7.49 0.2197 0.2949 c 2.032 4.83 0.0800 0.1900 d 0.50 1.40 0.0197 0.0550 e 0.30 1.15 0.0118 0.0453 g 9.65 10.67 0.3799 0.4200 i 3.53 4.09 0.1390 0.1610 k 0.50 1.15 0.0197 0.0453 m 1.14 1.78 0.0449 0.0700 n 2.28 2.80 0.0898 0.1102 o 12.70 14.74 0.5000 0.5803 p 14.22 16.51 0.5600 0.6500 symbols millimeters inches
life support policy: these products of ame, inc. are not authorized for use as critical components in life-support devices or systems, without the express written approval of the president of ame, inc. ame, inc. reserves the right to make changes in the circuitry and specifications of its devices and advises its customers to obtain the latest version of relevant information. ? ame, inc. , november 2003 document: 1012-ds1084-f corporate headquarter u.s.a.(subsidiary) ame, inc. analog microelectronics, inc. 2f, 189 kang-chien road, nei-hu district 3100 de la cruz blvd., suite 201 taipei 114, taiwan, r.o.c. santa clara, ca. 95054-2046 tel: 886 2 2627-8687 tel : (408) 988-2388 fax: 886 2 2659-2989 fax: (408) 988-2489 www.ame.com.tw e-mail: sales@ame.com.tw

▲Up To Search▲

Price & Availability of AME1084ACBT

	To Download AME1084ACBT Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .